How to configure a GPS for CC3D — LibrePilot/OpenPilot Wiki 0.1.4 documentation

How to configure a GPS for CC3D — LibrePilot/OpenPilot

CC3D or Atom flight controllers do not support GPS functions such as Return to base or Position Hold. The original CopterControl (CC) board does not have memory left for GPS use. The only purpose for GPS use is telemetry using radio modems (OPLink) or GPS position send to OSD device.

CopterControl / CC3D / Atom Hardware Setup — LibrePilot

LibrePilot/OpenPilot User Manual. Downloading and Installing Ground Control Station; Installing or Updating Your Firmware; CopterControl / CC3D / Atom Hardware Setup. CopterControl / CC3D / Atom Hardware Setup; How to configure a GPS for CC3D; Revolution Board Setup; Multirotor Hardware Setup; Multirotor Vehicle Setup Wizard; First Flight

GPS functionality with various CC3D FCs? – LibrePilot Forum

Feb 05, 2018 · The cc3d series boards can’t use a gps for anything but telemetry. The cc3d boards don’t do gps assisted flight modes. To do that you need a revolution series board. Additionally, the gps you purchased doesn’t work with the cc3d boards either because it doesn’t have a …

How to Set Bluetooth Device via ComBridge CC3D Oct 09, 2016
Revolution; GPS, Position Hold & Return to Home Feb 22, 2016
Mini GPS for Revolution and CCD3 Dec 19, 2015

See more results

OPWiki Documentation – Read the Docs

OPWiki Documentation, Release 0.1.4 RELEASE – OP-15.05.02 – Revolution Nano, Revo, OPLM and Platinum GPS Note: Please note that CC3D is NOT supported by this release.

Setup a CC3D for GPS – LibrePilot Documentation – Confluence

Remember: CC3D do not support autonomous features. This GPS setup is only needed if you want to use MinOPOSD (Distance to Home, heading data). See MinOPOSD setup page.

CC3D Flight Controller Guide – Guides – DroneTrest

The CC3D is a powerful and affordable flight controller that is very popular to use mainly on miniquad copters due to its small form factor. It has many advanced features that you can use if you add a GPS module, even waypoint based flight,. However, most users don’t bother with this for mini quadcopters and just want the basic setup.


CC3D flight control board Users Manual – geeetech

1. Connect your CC3D to computer with USB cable, open OpenPilot GCS, then click vehicle setup wizard.

LostOPWiki: How to Setup Failsafe for Revo and CC3D

Upon the ManualControlCommand->Connected state changing to False, the flight controller will react by applying the configured fail safe control values to each of the system control channels: Throttle, Roll, Pitch, Yaw, FlightMode, Collective, and Accessory 0, 1, & 2.

(5/10) CC3D Flight Controller – Adding a GPS for – YouTube

May 04, 2015 · As we discussed in the first video in the series this is of limited value as we cannot use the GPS for GPS flight modes (GPS Hold or GPS Home) as …

Confluence – JIRA

Something’s gone wrong. Our team has been notified. If the problem persists, please contact Atlassian Support.

LibrePilot – Open – Collaborative – Free

LibrePilot finds its roots in the OpenPilot project and the founding members are all long-standing contributors in that project. The LibrePilot Project will be governed by a board of members using consensual methods to make important decisions and to set the overall direction of the project.